| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Service |
| Warranty: | 12months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HDW-20M is a new generation of microcomputer controlled high and low temperature electronic universal testing machine. It is mainly used for tensile, compression, bending, shearing, stripping, tearing and other mechanical properties of aluminum insulation strip, plastic and various metal, non-metal and composite materials. The system adopts microcomputer closed-loop control, has a wide and accurate range of loading speed and force measurement, and has high precision and sensitivity for load and displacement measurement and control. The equipment is suitable for metal, adhesive, pipe, profile, aerospace, petrochemical, waterproof coil, wire and cable, textile, fiber, rubber, ceramics, food, medical packaging, geotextile, film, wood, paper and other manufacturing industries and product quality supervision departments at all levels, but also suitable for colleges and universities for teaching demonstration work.
| one | Maximum load (kN) | 20kn |
| two | Test force measurement range | 0.4% -100% FS |
| three | Test force grading | Can choose to divide into different levels or not divide into different levels throughout the entire process |
| four | Experimental force measurement accuracy | Better than the indicated value by ± 0.5% |
| five | Collection frequency | Not less than 1000Hz |
| six | Displacement resolution | 0.001mm |
| seven | Accuracy of displacement measurement | ± 0.5% |
| eight | Deformation measurement range | 0.2~100% FS |
| nine | Relative error of deformation indication | Within ± 0.50% |
| ten | Deformation resolution | 1/300000FS |
| eleven | Force control rate adjustment range | 0.005-5% FS/S |
| twelve | Relative error of force control rate | Within ± 1% of the set value |
| thirteen | Range of deformation rate adjustment | 0.02-5% FS/S |
| fourteen | Relative error of deformation control rate | When the speed is less than 0.05% FS, it is within ± 2% of the set value; When the speed is ≥ 0.05% FS, it is within ± 0.5% of the set value; |
| fifteen | Measurement range of beam speed | 0.001~1000mm/min |
| sixteen | Relative error of beam speed | When the speed is less than 0.01 mm/min, within ± 1.0% of the set value; When the speed is ≥ 0.01 mm/min, within ± 0.2% of the set value; |
| seventeen | Control range of constant force, constant deformation, and constant displacement | 0.5% to 100% FS |
| eighteen | Control accuracy of constant force, constant deformation, and constant displacement | Within 0.1% |
| nineteen | Stretching stroke | 0-800mm |
| twenty | Compression stroke | 0-800mm |
| twenty-one | Maximum stroke of crossbeam | 1000mm |
| twenty-two | Test width | 600mm |
| twenty-three | Power supply | 220V, 50Hz; 0.75kW |
| twenty-four | Host size | 960 * 1300 * 2200mm |
| twenty-five | Host weight | 450Kg |
| twenty-six | Testing machine execution standards: GB/T 16491-2008 "Electronic Universal Testing Machine" and GB/T1040-2006 "Tensile Testing Method for Plastic Properties" | |
| one | Box structure form | Integrated, the test box, controller, and refrigeration unit are installed separately |
| two | Studio size | three hundred × three hundred × 600 (mm) |
| three | External dimensions | five hundred × one thousand and five hundred × 900 (mm) |
| four | temperature range | -40 ºC~+350 ºC |
| five | temperature variation | Heating: -40 ºC~+350 ºC 1-3 ºC/min Cooling: 100 ºC~-40 ºC 1 ºC/min |
| six | control accuracy | ≤ ± 1 ºC |
| seven | Temperature fluctuation | ≤ 2 ºC |
| eight | Temperature uniformity | ≤ 2 ºC |
| nine | Corresponding to the top and bottom of the box Ф 50 * 2 | |
| ten | Cooling method | Compressor refrigeration |
The company has successively obtained ISO9001 certificate, CE certificate, electro-hydraulic servo pressure testing machine, electro-hydraulic servo universal testing machine, electronic universal testing machine and other testing machine category type evaluation certificate, the national steel structure industry Association member unit.Our company park is close to the west Viaduct of the Second Ring Road, the transportation is very convenient, the park covers an area of nearly 30,000 square meters, including the machining center, production and assembly workshop covers an area of 3,500 square meters, research and development department, technical service department and Marketing Department are located in the park Huayi Science and technology innovation office building, the company's management team with innovative, open and win-win thinking, Combining the model of production, university and research with a number of enterprises, research institutes and universities to provide professional material mechanics solutions.Adhering to the business philosophy of "survival by quality, development by science and technology, customer-centric, and brand by service", our company has won the trust and support of domestic and foreign customers by creating a high standard production quality management system, advanced new product development center, perfect after-sales service system and efficient after-sales service process.
1. Are you trading company or manufacturer?
We are a factory at Shandong,China.
2. Do you have after-sales service? How can I ask? What about warranty?
Before the delivery of the equipment, we will carry out the factory inspection and the equipment will be shipped after the inspection. If your machine does not work properly, you can contact us and we will try our best to communicate with you via email or skype video chat. We promise we will reply to you within 24 hours and with 3 Within a working day to provide solutions. After confirming that it is really necessary, we can send you new parts or on-site maintenance.
3. What is the delivery deadline?
Most of the time, we have inventory at the factory. If not, the delivery time is usually 15 to 20 days after receiving the payment. If you need it urgently, we can consider making special arrangements for you.
4. Can the device be customized? Can I customize my own design on the device?
We can not only provide standard machines, but we can also provide customized machines according to your needs.
At the same time, we can also place your trademark on the machine.
){kind=link}